Monday, January 1, 2018

New Year's Day Non-Ride and a Look Back

It's currently a frigid 5° (windchill -6°) in Akron, and our roads (at least around my neighborhood) are covered with a layer of packed snow and ice because apparently the city is trying to conserve salt for when winter arrives. In other words, the closest I'm getting to a New Years Day bike ride is this:

The orange Mercian has been tuned up and waiting for a ride since before Christmas. Sorry, not today friend.
After a couple of unusually mild winters, I'd been expecting a harsh winter this year, and it looks like we may be getting it. And of course the climate change deniers are taking to Twitter and other media to tell us that, because it's really cold in parts of the country this week, that means that climate change is a total hoax. Some even go as far as to say that the "Arctic Blast" we're experiencing is a liberal conspiracy to kill the oil, gas, and auto industries.
Damned liberals and their weather controlling magic.
I'm not even sure how that's supposed to make sense, but . . .

I know that as soon as I say something like "it's too cold to ride," some overly smug bastard will humblebrag that he doesn't really start feeling the cold until it gets down to -20°, so he might have cut his ride short to "only" an hour.

"If your eyeballs aren't frozen solid in their sockets, you're just a fair-weather chicken-livered pantywaist creampuff."
I'll just have to try to live with myself.

In any case, when it gets like this, and I can't get out to ride, my next favorite thing to do is work on a bike project. For instance, last winter (and spring) I had this one:

And the previous year, I had this one:

A few years back, I refurbished this old Trek mixte for my wife:

Building wheels is a fun project, too:

Unfortunately, I don't currently have a bike project. I'll end up doing some maintenance on some of the bikes in my current fleet, but both of the retro-kids need braces, so I don't anticipate any new (old) bikes for me in 2018. Hell, I'd settle for building up a new (old) bike for someone else if they were paying the tab.

If you can't tell, it's January 1, and I've already got winter blahs.

I did recently pick up a copy of a new book on restoring vintage bikes, so I'll just have to hunker down and get some vicarious enjoyment out of someone else's old bike projects. I'll put up a post with more info about the book in the near future.

Wherever you are, I hope your new year gets off to a good beginning. If anyone has a bike-related new year's resolution to share, feel free to leave a comment. Who knows? You just might inspire someone.

Monday, December 25, 2017

Merry Christmas From The Grouch

Our weather isn't permitting me to go for my traditional "Christmas Day Bike Ride" this year - unless I can put some chains on my tires.

If you're cold, they're cold. . . Bring them inside!
So I'm reflecting a bit on Ghosts of Christmas Past as I sip some coffee and watch the retro-kids enjoy their new presents. It won't be long before I'll be busy preparing for visiting in-laws, so I'm making the most of the quiet.

There were no bicycles under the tree this year, though to my mind, a bicycle has always been the ultimate Christmas present. Little Ralphie and his Red Ryder BB gun notwithstanding, I'm sure I'm not the only one who feels that way. Remember ads like this?
Merry Christmas from Schwinn - 1972.
It's been a long, long time since I've found a bicycle under the tree, unless I put it there for someone else. I think the last time I got one was about the same time that little kid in the Schwinn ad was pouncing on his new Sting-Ray. Even though I'm long past getting bikes for Christmas, my "second favorite" present these days is a gift card from the bike shop.
Always the right size and the right color.
And I don't think it was meant as a joke.
There seems to be bit of a stigma among some people about gift cards as being "impersonal." That attitude might be changing, but to my mind, whether a gift card is a thoughtful gift or a thoughtless one depends on one simple and obvious distinction: did the giver actually think about what they were giving? I mean, isn't that true of any gift? Seriously, I could fill a couple of closets with all the useless "thoughtful" gifts I've gotten over the years -- perhaps the epitome of which would be the fish broiler basket for the grill, made particularly useless by the fact that it's no secret that I absolutely hate fish. Believe it or not, I've actually gotten two of those.

Sure, gift cards can be impersonal or thoughtless. It isn't uncommon for me to clean out a drawer and find old unused gift cards that I've totally forgotten about. Cards for restaurants that I hate, or that don't have a location anywhere near my home. Or for stores that I never visit. But a card from the bike shop? I'll always find a good use for that. New gloves, tires, or tools -- there's always something I'll find that I need and will use.

It's not quite as exciting as finding a beautiful gleaming bike beside the tree - but in practicality, it's pretty close.

Wherever you are, I'm wishing you the best that the holiday season can bring you!

Friday, December 15, 2017

New Record Commuting Numbers

Well, I'm just days from wrapping up a semester at work, and I'm pleased to say that I've racked up a new personal record for bike commuting. With just three days left until Winter Break and the end of our semester, I have logged 68 days on my tally. Up until last week, I had been maintaining a bike-to-work average of 90%.

Then the snow came.

With the snow we had this past week, riding a bike would have been ill-advised, and it's a bit unclear what the next week will have in store for us. If I'm lucky, I could possibly pick up another day or two before the break, but even if I don't, 68 days would let me finish 2017 with an average of about 83%. My previous record was 63 days and 75% (two years ago), and last year I "only" had 58 days or just shy of 70%.

1,917 miles. That's how many miles I've managed between mid-August and now, riding back and forth to work. I figure that probably works out to around 63 gallons of fuel that I didn't put into my car, or somewhere in the neighborhood of $140 - $150 in fuel costs. For the full calendar year 2017, I had 118 days of bike commuting for a total of 3327 miles. Also a new personal record.

In the past year, my best month was without a doubt September. I drove only one day the entire month and had a month-long average of 95%. And I'm still really bugged about the one day I drove. I remember it because that morning looked like it would be a good one for riding, but the weather forecast was calling for an 80-90% chance of thunderstorms in the afternoon - likely to start just about the time I'd be heading home. The way I see it, rain isn't much fun to ride in, but thunderstorms are definitely a bad idea on a bicycle. It's like having a lightning rod between your legs. As it turned out, not only did we NOT get any thunderstorm that afternoon, but it didn't even rain. Nothing. Nada. Zip. So I ended up driving for no good reason on a perfectly good riding day, and the only thing I can say in defense is that if I had ridden, we would almost certainly have gotten that thunderstorm.

A handful of things helped me maintain such good numbers. One was weather. Generally our weather during the fall was pretty good this year. We've had some really cold mornings in recent weeks, but until the snow hit this week, it was always manageable.

Another thing was a slightly different attitude towards rain. I still really don't like riding in rain, and up until this year I'd been making a pretty concerted effort to avoid it. That included driving on days when the forecast called for a strong likelihood of rain in the afternoon (for me, that usually meant more than 50% chance). So, about that day I already mentioned when I drove to avoid the thunderstorm that never happened? Most previous years I'd have a lot of days like that one. What I've often found is that when I'd drive, the rain wouldn't come - or at least, it wouldn't come until I would have made it home on my bike. The thing is, I've got a bunch of rain gear packed into my saddlebag. Jacket, pants, and shoe covers. And I would end up driving because I was worried it might rain in the afternoon? This year, apart from that day calling for thunderstorms, I decided to take the risk a lot more often than not. Guess what? I got rained on a bunch. Turns out, there are lots of times when they say it's likely to rain in the afternoon, and it actually rains. Though I'm still enough of a believer in Murphy's Law to be convinced that had I driven on those days, it probably wouldn't have rained.

A third thing was using a bike that I don't have an emotional attachment to. Beautiful vintage steel bike with a leather saddle in a rainstorm? Makes my stomach churn just thinking about it. The non-retrogrouchy bike I've been commuting on most of this year? Meh. Rain, slush, road salt - I just don't care. I still have a comfortable Brooks saddle on it, but in this case it's one of the new-generation C-17 models with a rubber top. Promises to be more weather resistant than traditional leather. And while I'm still convinced that disc brakes offer little-to-no advantage on a road bike in good weather, I have had to admit that their effectiveness in the rain is quite reassuring.

No telling how well I'll be able to keep it up through the winter. We've had two unusually mild winters in a row, so I expect we're due for a bad one this year. But I've got good numbers going into it, and am well-equipped for winter riding so we'll just have to see.

UPDATED 12/20/2017: The snow and ice we got last week started melting over the weekend, revealing our roads again, and making it possible for me to add a few more days to my commuting totals. New Record: 71 days, 2002 miles. Bike-to-work average from August through December, 86.5%

Tuesday, December 12, 2017

Lake MXZ 303 Winter Boots

If you are a winter rider, you know it can be hard to keep your toes warm when temps get below freezing. Over the years, I've mostly relied on my traditional leather riding shoes with wool socks, and covering the whole package with insulated "overshoes" or "booties." As a commuter, I still think there's something to be said for that approach - particularly on those days when the morning is cold, but the afternoon warms up to the point where the extra warmth and bulk aren't needed. In November, for example, it isn't unusual to have a morning around 30°, with afternoon temperatures rising to 50° - in which case, it's an easy thing to stow the booties into a pannier or seatpack for the ride home. But when it's really cold, and expected to stay that way throughout the day, having some serious dedicated winter footwear can be a welcome luxury.

For my birthday this year, the retro-wife really came through, and I got a pair of Lake MXZ303 winter riding boots. I've had the chance to wear them on some awfully cold commutes in the past month, and so far have found them to live up to the billing. My coldest morning in this time was 20°, with a wind chill making it feel closer to 10° and my feet never felt a chill, even after an hour of riding. I feel pretty confident they'd be good for even a little colder, though to be honest, I don't see myself riding below 10 - 15°, so they'll definitely meet my needs.

For sizing, I've seen a number of reviews that recommend going up a size from your normal cycling shoe size, and I agree with that. In most cycling shoes I wear a 44, and in these I got a 45. Don't ask me what that is in US sizes, because the conversion charts seem out of whack to me. Most charts I've seen say that Euro 44 is equivalent to a US 11, and yet I've never been able to wear anything larger than a US 10 in my life. Go figure. Anyhow, with a 45, I can wear these with extra thick wool socks without feeling constricted in any way. For those who have wider feet, or who maybe want to double up on socks, Lake also makes these in a "Wide" version, that I understand adds quite a bit of room in the toe-box. Mine are the "regular" and fit me fine.

The sole is thick with large lugs for sure footing when it's slick. I have found them to be decent for walking at least for short distances.

You'll notice that the Lakes have a very modern non-retrogrouchy "BOA" closure system. That seems to be the latest thing in cycling footwear. I've found that it works well, though I've yet to see any problem with traditional laces. Seriously - what's the hangup with normal laces on cycling shoes today? I suppose one doesn't need to worry about laces getting caught in the chain. OK, score one for BOA. But I do wonder what happens if that BOA thing eventually breaks. Can it be replaced easily? I don't know the answer. If any readers have some experience with that, leave a comment.

Regular readers know that I still have a preference for traditional toe-clip and strap pedals. One thing about the Lake boots is that they don't really lend themselves to use with a traditional pedal. The thickness of the toe-box and the lugged sole make getting into a toe-clip pedal difficult and awkward. I tried (briefly) switching my pedals to a pair of flat/platform pedals for winter riding, but I find that I don't really like using those on my commute. I don't mind flat pedals when riding around the neighborhood, shopping, or with my kids when the pace is kept casual. But on longer rides, especially if there are some hills, I just really prefer to have a better "connection" to the pedals. I don't need to be "locked in," but even with toe straps, I generally keep them just tight enough to keep my feet from coming off the pedals inadvertently, without being so tight that I can't get a foot out quickly if need be.

The Lake boots are designed for an SPD-type 2-bolt cleat. I know there are lots of choices in compatible cleats and pedals out there, but I found these Crank Brothers pedals on clearance for only $29 from Nashbar that seemed like they'd be a worthwhile choice as a winter pedal - and cheap enough that it would be hard to go too wrong. They have the easy-to-engage "egg beater" system on one side, and a basic flat platform on the other. I've found that in traffic, if for some reason I have trouble "clicking in" on the first try, the full platform still makes it easy enough to get pedaling from a stoplight. They seem to be working out well with the winter boots, and come spring, I can easily switch pedals if I wish.

In case anyone's wondering about what socks I'm using this winter, I'll mention that I'm a big fan of the socks from SmartWool. Though not actually marketed for cycling, SmartWool's Slopestyle PhD skiing socks are awfully nice on those extra-cold mornings. Being extra tall (they come up almost to the knee) they keep the lower legs warm and keep the cold winds out even if one's tights or riding pants leave a gap above the ankles. And they are extra thick, including at the toe and on the bottom of the sole. That last detail is good because I frequently hear people say that cold sometimes seeps in through the soles of some winter cycling shoes/boots (the cleat interface is often cited as a trouble spot). As thick as they are, they still fit into my boots comfortably (remember - up one size). Like a lot of SmartWool socks, these come in some pretty outrageous colors and patterns - but I believe they also come in plain black. I don't mind the patterns. Shop around, but the going rate seems to be in the $15 - 17 range, which I think is quite reasonable.

Back to the boots - of course there are plenty of options out there today. I've also heard good things about the boots from 45NRTH. I couldn't possibly give a functional comparison between them (unless they'd like to send me a pair to try out). The 45NRTH Japanther boots, which seem to have a slightly milder mission to these Lakes, have a listed temperature range of 25 - 45° with online prices ranging from about $195 - $225. The 45NRTH Wolvhammers, which seem a bit bigger and bulkier, have a listed range of 0 - 25° and sell for $325 or more. I cannot find a claimed temperature range for the Lake MXZ303 boots, but as I've already pointed out, they have worked well for me at 20° and I suspect they'd be good safely down to 15°. Prices online seem to range between $175 - $250.

I don't know if expensive 1-season boots are the thing for everyone out there - but for my needs, I'm feeling good about them.

Friday, November 24, 2017

Nothing Black About This Friday

It's been a while since I've been able to post here - Sorry about that, folks. Since August, I've been teaching a couple of college-prep writing classes, and it seems that all my time is spent grading essays. And if I'm not grading essays, then I'm feeling guilty about not grading essays because I'm up to my knees in them.

Anyhow, today is "Black Friday" but instead of going shopping and fighting the crowds at the mall and the big box stores, I got out for a bike ride with an old friend.
Hello, old friend.
I didn't have time to ride very far, as I had to bake bread for the Thanksgiving sequel - Thanksgiving II: The In-Laws. But in Akron this morning we were greeted by stunningly clear skies, and I figured I could get out for an hour or so without messing up any plans. It was chilly in the upper 30s when I headed out, but temps had risen up into the low 40s by the time I was pointed toward home. A thick wool jersey over a wool undershirt, some fleecy tights, and a wool cap under my helmet were sufficient for a comfortable ride. I felt the chill at the beginning, especially on the long fast descent into the Cuyahoga Valley, but I warmed up as I continued on.

Since August I've put in a lot of cycling miles (about 1600!), but almost all of them have been commuting miles to and from work, on a totally non-retrogrouchy bike completely decked out for utilitarian duties: racks, fenders, lights, and an assortment of bags. That bike is pushing roughly 40 pounds fully equipped for commuting. Getting on the green Mercian felt so different, and not just because it's roughly 18 pounds lighter. It's got much more "aggressive" geometry and handles so nimbly. I've written lots over the years about how weight doesn't make that much difference on a bike - and if you're only talking about a couple of pounds, I still stand by that. But 18 pounds is pretty significant, and when accelerating from a stop, or hammering up over a small rise, the Mercian just feels so alive.
Campagnolo actually called their mechanism "Doppler" action.
It very closely mimicked the feel of the wonderful Simplex
Retrofriction, but didn't copy the inner workings.

The shifting is another thing that I have to comment on. The bike I've been commuting on has Shimano STI controls, and I've gotten so acclimated to using them almost exclusively for the past few months that I had one (very brief) brain lapse where I felt the need to shift and actually reached for a nonexistent paddle behind the brake lever. DOH! Apart from that (really, very brief) moment, I really am happy to say how much I appreciate the Campagnolo retrofriction levers on the downtube. No, they are not as "convenient" for shifting as the modern integrated brake/shift controls. But the feel of these downtube levers, and the action of the old-school, non-indexing derailleurs is just so nice. There's such a tactile connection from the lever, through the cable, to the derailleur, and you can feel the shifts happening - feel the derailleur moving the chain across the cogs or the chainrings. That feedback is largely missing from today's integrated controls. This is especially true for front shifting, and I would even go so far as to say that Campy's '70s and '80s era front derailleurs shift better than front derailleurs from any brand made today. I really feel like the front shifting with Shimano STI is particularly abysmal, especially when shifting from the big chainring to the smaller one. Know what I'm talking about? You push the shift paddle until it gives a very distinct KERCHUNK, then the derailleur's return spring takes over and slams the chain down to the smaller ring. Campy's Ergo controls feel better to me in that regard, but I still enjoy the feel of a nice pair of downtube levers. I have no interest in electronic shifting.

Anyhow - I'll just wrap this up by saying what a pleasure it was to get out on this day-after-Thanksgiving on such a sweet-riding, nimble bike, and I hope some of you were able to enjoy a good holiday ride as well.

Saturday, October 7, 2017

Suicide Components: Death By Bicycle

Spend enough time talking with vintage bike nuts, and you'll start to think that cyclists are a morbid lot. It's not that bicycling is an especially dangerous activity (car-centric folks would disagree, but it's really no more dangerous than many other physical activities - skiing anyone?). Listening to us talk about bikes and components, you'll find a lot of parts that have been dubbed "death" this and "suicide" that.

It's kind of a fun topic, and probably worth a look at the parts and how they got their reputations.

Suicide Shifters: Sometimes parts take on these morbid nicknames because they are risky to use, maybe because they have developed a reputation for breaking at inopportune moments. That is NOT true of these, however. There's really nothing suicidal about "suicide shifters," and as I understand it, it's really only in the U.S. that they have the name. Suicide shifters are derailleurs (usually front units, though not always) that are operated by a relatively large/long lever that is often located between the rider's legs, or anywhere vaguely in that general vicinity.

Simplex "suicide shifter" on an old Falcon (found on the CABE).
Retired framebuilder Dave Moulton had an interesting article about them on his blog some years ago that is worth a read.

There are a few brands and varieties of these front derailleurs - many of them French, and many of them made or used through the '50s and '60s. Some worked by twisting the handle on the lever, or by pushing it forward/back, or in/out. There's not really anything particularly dangerous about them (certainly no more dangerous than the big saw-toothed chainring within inches of one's calves and ankles), but perhaps American men are/were more paranoid about reaching between their legs to shift than their European counterparts?

"Suicide Shifter" on an old Indian.
Actually, I'd say it's likely that the origin of the name comes from vintage motorcycles. It was not uncommon for old Harley-Davidson, Indian, and other similar American bikes to have a big shift lever next to the gas tank, with the shift knob located somewhere between the rider's knees -- though again, there was nothing inherently dangerous about that, either. I assume there were probably a few jokes about potentially being impaled, or maybe castrated by the shifter in the event of a crash, and riders dubbed them "suicide shifters" as a result (though I suppose they could just as easily have called them "castration levers"?) and bicyclists probably saw the similarity and took the name.

People of my generation probably have fond memories of this old beauty:

1968 Schwinn Orange Krate
As a kid in the early '70s, I and all my friends lusted after the Schwinn "Krate" bikes with their big Stik Shift on the top tube. That was where I first heard the expression "suicide shifter" because everyone talked or joked about the possibility of losing our future manhood on the stick. The industry safety forces must have taken it seriously, because they eventually got rid of the big shifters. When Schwinn re-issued the Krate bikes in the 1990s, one detail they conspicuously omitted was the Stik Shift. No doubt the CPSC would never approve of that component today.

Cinelli "death pedals" (photo from Velobase)
Death Pedals: Usually refers to Cinelli M-71 clipless pedals. Again, the nickname of this item is pretty misleading, as I highly doubt anybody ever died using these. Introduced in either 1970 or '71 (the model name "M-71" would seem to indicate the latter), these were one of the first clipless pedals on the market. Unlike the LOOK pedals of the mid '80s (and later Time, Shimano SPD, and many others) with their hands-free engagement and release, the Cinelli pedals had a sliding lever that had to be activated to get out of the pedals.

To get into them, the rider would line up the cleat and slide it between the channels on the sides of the pedal, then move the lever which would pop up a pin that would lock the cleat securely in place. I'm sure the perception was that once locked in, there wasn't any easy getting out of the pedals in an emergency. I guess one could say they "hung on like death"? Understand, however, that at this same time, many riders were strapping in with leather straps cinched tight over slotted cleats, and it wasn't so easy to get out of those in a hurry, either. Both systems still required that the rider reach down and either loosen the strap or slide the lever to get out.

It's also worth noting that (as far as I know) the Cinelli pedals were really intended for track use, not road, which is a very different kind of riding environment. I mean, it's not as if one should need to disengage from these pedals in a hurry to avoid being nailed by a taxi.

Lambert Death Fork: Here's an item that did actually get its nickname because of a bad reputation for breaking (though again, I'm not sure anyone ever actually died as a direct result). The Lambert bicycles from England in the early '70s were an interesting attempt to offer high-performance bikes at a reasonable price. Besides having a lot of unique brand-specific components, the bikes were notable for having a high-tech weight-saving aluminum fork.

The Lambert "death fork" (photo from ClassicRendezvous)
The problem was that the fork was poorly engineered. It had a one-piece aluminum crown and legs attached to a steel steerer, held together by a couple of hollow pins and some well-meaning prayers. After some reports of breaking, the company slightly redesigned the attachment point (with one pin instead of two?), which wasn't enough to solve the issue. Financial problems at the corporate level didn't help any, and with new backers the company became Viscount, which also ran into financial difficulties and was purchased by Yamaha (maker of musical instruments and motorcycles), which conducted a full recall of the forks. I understand they were replaced by a better-engineered aluminum fork that featured a threaded and bonded joint between the crown and the steerer.

I've read that the number of broken forks was only about 1% of about 30,000 bikes equipped with them, which doesn't sound so bad -- though if I had one, I'd still be extra cautious. I mean, Lambert/Viscount is long gone, and I assume Yamaha long ago washed their hands of the whole thing, so if you get hurt, who are you going to sue?

Death Stems: There are a few old stems that fit this description, but the most well-known are the AVA stems like the one shown here.

The AVA "death stem" (photo from VeloBase)
These stems, often found on bikes in the '60s and early '70s, had the look of being "lugged and brazed" construction, but were made from cast aluminum. A place where they often broke was on the lower part of the quill, just above the cone-type expansion wedge. If you look at the top of the expansion slot, you'll see that it is just a sharp-edged cut, with no stress relief there to prevent cracking. Not only that, but there were two such slots, one on each side of the stem - so a crack could just work its way right around the whole thing, and the stem could suddenly snap right off. I've also heard of these cracking at the bar clamp area. On the whole, these were made very light, but didn't have enough metal in key stress areas to be durable. As mentioned, I believe that these were cast aluminum, as opposed to forged - but forging would have proven to be stronger as well.

It's important to note that not all models of AVA stems were prone to failure, and that they weren't the only ones. There were some similar-looking stems made by Atax and Pivo that could also break in much the same way. By the way, I don't want to get bunches of emails asking "is my stem safe to use?" There's no way I can tell everything about every brand and model to say which ones are OK and which ones aren't. Remember, we're talking about components that are 50 years old.

I will say that some of these lugged-style aluminum stems are a little more robust than others, and if they have a regular wedge as opposed to the cone-type, they might be a little more reliable. Also, if there is only one expansion slot instead of two, that is a good sign. If I had one of the type with a single expansion slot and really wanted to use it, I'd probably drill a little hole right at the top of the slot and file it so there was a nice, smooth, stress-relieving transition. But again, there can still be risks. These old stems are really cool looking, but on my vintage bikes (which I actually ride), I don't hesitate to install a more modern, reliable, cold-forged stem.

Style only takes a person so far, and I'd really like to keep all my teeth.

Thursday, September 28, 2017

An Unexpected Moment of Humanity

I've written plenty on this blog about dealing with traffic -- on being a cyclist in a car-eats-bike world. Whether it's angry drivers who insist on blasting their horn as they pass, or impatient drivers who think nothing of putting cyclists at risk to save a few seconds, or simply arguing with idiots who've convinced themselves that it's cyclists who are the problem, "sharing the road" has been the subject of a lot of posts.

Anybody who rides on the roads as much as I do (and probably most Retrogrouch readers) can probably tell "war stories" all day long. Ken Burns should do a documentary. Whether it's due to driver inattention/distraction, ignorance, "cluelessness," impatience, or even sadistic malice, I've had plenty of close calls with drivers (and been hit once).

I never had one of these close calls when I've been the driver of a car, but if I did ever somehow put a cyclist at serious risk, I'd like to think that I'd feel pretty bad about it. I mean, wouldn't that be a natural reaction? When faced with the fact that we may have come very close to injuring someone with our car, particularly if it was through our own negligence or fault, wouldn't one expect any humane person to feel at the very least embarrassed, if not horrified? In my experience as a cyclist, that is not the reaction I usually see from drivers.

Instead, my experience usually goes something like this: A driver makes some bone-headed move that puts me in danger. For example, a driver fails to stop for a stop sign -- they approach the road I'm on from a side street or a parking lot, they take a cursory look down the road for cars but look right past me, the cyclist (despite my lights and fluorescent clothing, etc.), and they blow right through the stop sign without stopping. As the cyclist who is a split second from being turned into a hood ornament, I'll scream out "STOP" or "HEY! WATCH IT!" or something similar, and yes they'll slam on the brakes. Now, it's obvious that this was the driver's fault. I was the through-traffic, and they were blowing off a stop sign to save themselves a couple of seconds, which could easily have resulted in death or serious injury to me as the cyclist. So, do they continue on their way in silent shame? Offer a meek apology? Or even just an insincere "Sorry - My Bad"?

Hell no.

Usually, just the fact that I reacted to them by yelling out (even if it's just yelling to save my skin), a lot of the drivers I encounter go into full-out road rage mode. Some will lay on the horn and give me "the finger." Others will scream out some profanities. The real psychos will threaten to "finish the job" next time they see me. Remember the bastard I wrote about in my last post about traffic roundabouts? "YOU GODD*MNED A**HOLE. I SHOULD'VE F**ING KILLED YOU!" is something I've heard more often than anyone should.

All this makes what happened to me yesterday so much more unexpected.

I was riding home from work along a 2-lane backroad, keeping up a pretty good pace of around 20 mph. Coming up on my left was a side street where I saw a car wanting to make a left turn. Just as I got to the intersection, the guy pulled out and was heading right for me. It was pretty obvious he didn't see me, and he was essentially planning on moving right into the physical space I was occupying. Of course I was slowing and getting over to the right as far as I could go while at the same time I was screaming at the driver "HEY! WATCH WHERE YOU'RE GOING!!"

I was still intact, but mad as hell and I yelled some things at the back of his car as he drove off. Before I knew it, I saw the guy pulling over, and I immediately thought, "Oh great - here we go again." I was fully expecting the driver to start screaming threats and insults or something. Maybe he was going to try to start a fistfight (yes, that has happened).

What happened next shocked the hell out of me.

When I got up to where the driver had stopped, and he was getting out of his car, I could see that he was looking pretty sheepish as he stepped in my direction.

"Hey man - I'm really sorry about that back there. You OK?"

. . . (shock and disbelief) . . .

"Yeah - I'm fine. I'll get over it. Thanks."

Normally after I have one of these near misses, and the drivers act like complete @$$holes, I end up fuming all the rest of my ride. Not this time, though. It's amazing how somebody simply acknowledging that they screwed up and saying "Sorry" (and actually meaning it) can make such a difference. Too bad it's such a rare thing.

Anyhow - as if to prove that the balance of the car-bike universe hasn't shifted in some truly positive way, just this morning I had an oncoming car make a left turn directly in front of me. His car literally passed about three feet off my front wheel. In shock and surprise, I yelled out "HEY!" (just "HEY" - nothing more). The driver, whose window was open, yelled back "WATCH WHERE YOU'RE GOING @$$HOLE!"

All is right with the world.